In order for an AND gate to be enabled
A) both inputs should be HIGH. B) one input should be HIGH.
C) one input should be LOW. D) both inputs should be LOW.
B
You might also like to view...
When removing the engine, if the air conditioning compressor is to be removed, you should always recover the system's refrigerant.
Answer the following statement true (T) or false (F)
A water supply line that a plumber is installing requires the close control of flow at all times. To ensure
maximum control, the plumber should install a _____. a. ball valve b. check valve c. globe valve d. gate value
If the compression ratio of a system with a reciprocating compressor decreases, the amount of refrigerant pumped by the compressor ____.
A. will increase B. will decrease C. will remain the same D. cannot be determined
Boolean, integer, and floating point constants for FBD instructions ________
A) Can be entered in the FBD instruction dialog box B) Can only be entered using the FBD input reference box C) Can be entered as either an input using the input symbol or inside the instruction box D) Can be entered as an input in an input symbol