A low pressure control has a "high event" and a "differential" setting. The technician wants the system to turn on at 28 psig and shut down at 2 psig. What would be the proper settings?
A. High event: 28 psig, differential: 2 psig.
B. High event: 2 psig, differential: 2 psig.
C. High event: 28 psig, differential: 26 psig.
D. High event: 2 psig, differential: 28 psig.
Answer: C
You might also like to view...
How is the call setup in a satellite system different from a cellular system?
What will be an ideal response?
Where would you most likely find a thermocouple pyrometer on a current highway diesel engine?
A. 12-inches downstream from the turbo B. diesel particulate filter (DPF) C. exhaust gas recirculation (EGR) heat exchanger D. selective catalytic reduction (SCR) circuit.
A cooling tower with its fan located in the air stream entering the tower, blowing the air through the tower is
A) An induced draft cooling tower B) A forced draft cooling tower C) A natural draft cooling tower D) A hybrid draft cooling tower
What is the grade when insulation is installed with moderate to frequent installation defects around wiring, outlet boxes, and plumbing, rounded edges or incomplete fill thickness in 10% of the area, and the gaps through insulation are no more than 2% of the surface area covered?
A) Grade 3 installation B) Grade 1 installation C) Grade 2 installation