Use Data Sheet 5. Refer to the figure. Assume 2" PVC. Find e-e of pipe J
Fill in the blank(s) with the appropriate word(s).
9-5/16"
You might also like to view...
If five No. 10 AWG current-carrying conductors are installed in a raceway where the ambient temperature is 70°F, the allowable ampacity must be ____
a. increased by 15% b. increased by 20% c. reduced to 80% of its value d. reduced to 60% of its value
A battery high rate discharge (load capacity) test is being performed on a 12 volt battery. Technician A says that a good battery should have a voltage reading of higher than 9.6 volts while under load at the end of the 15-second test. Technician B says that the battery should be discharged (loaded) to twice its CCA rating. Who is right?
A) A only B) B only C) Both A and B D) Neither A nor B
You wish to measure 1500 cylindrical parts produced on a CNC bar chucker. The tolerance on the parts is +/- .005 inch. These measurements could most efficiently be done:
A) With a dial indicator comparator with .001 inch discrimination B) On an electronic comparator with .00005 inch discrimination C) On an optical comparator D) With a vernier micrometer with .0001 inch discrimination
Antenna bandwidth is defined with respect to its design _____________
A. frequency B. components C. complexity D. directivity