The differential cover must be removed before removing the rear axle on which type of axle?
A) Welded tube B) C-lock C) Press fit D) Retainer plate
B
You might also like to view...
A section of a two-lane rural highway is to be realigned and replaced by a four-lane highway with a full-depth asphalt pavement. The AADT (both ways) on the existing section can be represented by 500 ESAL. It is expected that construction will be completed 5 years from now. If the traffic growth rate is 5% and the effective CBR of the subgrade on the new alignment is 8.5, determine a suitable depth of the asphalt pavement using the AASHTO method. Take the design life of the pavement as 20 years. The resilient modulus of the asphalt (EAC) is 400,000 lb/in2. Assume mi for the subgrade is 1 and the percent of traffic on the design lane is 45%. Use a reliability level of 90%, a standard deviation of 0.45, and a design serviceability loss of 2.0.
What will be an ideal response?
What precautions should be taken before working under hydraulic hoists?
A. Just make sure the hydraulic valves are in the proper positions. B. Make sure all electrical controls are stopped. C. Makes sure it is mechanically supported. D. Make sure it clears your head while standing erect.
The most likely ADC architecture for a spectrum analyzer is:
A) successive approximation. B) pipelined. C) sigma/delta. D) none of the above.
By reversing the ____ of the ohmmeter, both of the SCRs in a triac can be tested.
a. current b. resistance c. polarity d. inversion