A drive control that returns to neutral and locks when released is referred to as a(n) _____.
a. emergency cutout
b. safety interlock
c. deadman switch
d. termination device
Answer: C
You might also like to view...
The separately derived system equipment bonding jumper is now called the ___________________.
Fill in the blank(s) with the appropriate word(s).
This geometric tolerance requires that the actual feature be between two parallel planes or lines that are perpendicular to a datum.
a. profile b. parallelism c. perpendicularity d. angularity
A three-input NOR gate will have a HIGH output whenever
A) one input is HIGH. B) three inputs are HIGH. C) two inputs are LOW. D) three inputs are LOW.
In CAD, alternative shapes and sizes can be built into a part, sometimes called ____, and the designer can look at and analyze many "what if" scenarios.
A. analogies B. configurations C. sketches D. synectics