What procedure is used when heating a brazed copper joint?

A) Heat the fitting first and then heat the pipe after the fitting is hot.
B) Heat the pipe first and then the fitting.
C) Use a fanning motion to heat the fitting evenly and slowly.
D) Concentrate the flame on the line where the pipe slips into the fitting.


B

Trades & Technology

You might also like to view...

When looking through the microscope, how does the appearance of the

letter ā€œeā€ compare with the orientation on the slide?

What will be an ideal response?

Trades & Technology

Pigs suffering from Porcine ____________________ Syndrome have very little tolerance to the stress associated with things like hot weather

Fill in the blank(s) with correct word

Trades & Technology

Propane can be used to locate the sources of vacuum leaks.

Answer the following statement true (T) or false (F)

Trades & Technology

The terminal and wire resistance values are critical in electric furnaces because the large current draw from the strip heaters:

A) Turns even small resistances into heat that accelerates oxidation. B) Causes electro radiation. C) Causes arcing to ground at connections with a high resistance. D) Increases if the overall circuit resistance increases.

Trades & Technology