An air/fuel ratio sensor is used instead of a conventional oxygen sensor because:
A. the air/fuel ratio sensor does not require a heater element
B. an air/fuel ratio sensor allows for more accurate fuel control
C. an air/fuel ratio sensor is less expensive than a conventional oxygen sensor
D. none of the above
Answer: B
You might also like to view...
How far below the finished surface should snow-melting and anti-icing systems be installed?
a. 1/4 to 1/2 inch (6 to 13 mm) b. 1-1/2 to 2 inches (4 to 5 cm) c. 2 to 3 inches (5 to 8 cm) d. 3 to 4 inches (8 to 10 cm)
What is the total pulling tension when pulling a cable weighing 5 pounds per foot through a 500' conduit with a coefficient of friction of 0.35?
a. 176.75 b. 180 c. 875 d. 7,142
The primary purpose of a visual inspection is to identify flaws that might pose a threat to a pipe's _____.? ?
Fill in the blank(s) with the appropriate word(s).
The mammary gland is made up of lobes, and with each lobe is a series of ____________________
Fill in the blank(s) with correct word