The rotating part of a DC motor that is mounted to the shaft is called ____.

A. field windings
B. brushes
C. armature
D. magnets


Answer: C

Trades & Technology

You might also like to view...

Technician A says a pressure test can verify problems with valves inside the valve body. Technician B says the valve body on most transmissions can be serviced while the transmission is still in the vehicle. Who is correct?

A. A only B. B only C. Both A and B D. Neither A nor B

Trades & Technology

Irritation from the skin is damaged and lower blood pressure by dilating the blood vessels, the immune system releases:

What will be an ideal response?

Trades & Technology

PM motors used in power windows, mirrors, and seats can be reversed by ___________

A) Using a relay and a two-way clutch B) Reversing the polarity of the current to the motor C) Using a reverse relay circuit D) Sending current to a reversed field coil

Trades & Technology

A primary difference between a clocked J-K flip-flop and a clocked S-C flip-flop is the J-K's ability to:

A) remain in the CLEAR state when J = 1, K = 0, and a clock transition occurs. B) always reset to the set state when J = 1, K = 1, and a clock transition occurs. C) toggle or change states when J = 1, K = 1, and a clock transition occurs. D) always reset to the CLEAR state when J = 1, K = 1, and a clock transition occurs.

Trades & Technology