How are volt meters connected to read the voltage drop across a load in a circuit?
A) One lead is connected to the load and the other lead is connected to ground.
B) Voltmeters are connected in series with the load.
C) Any connection to the circuit will give the same reading.
D) Voltmeters are connected in parallel with the load.
D
You might also like to view...
Gasoline fumes are less flammable than liquid gasoline.
Answer the following statement true (T) or false (F)
On a power steering rack system, a customer complains that the steering wheel is not level. The concern is verified during a road test. It is also noticed that the wheel is sometimes off to the right, and sometimes off to the left. The most likely cause of this condition is:
A. Incorrect preload on rack guide B. Incorrect tire pressure C. Wheel alignment being out of specifications D. Worn mounting bushings for the power steering rack housing
Technician A says many limited-slip differentials rely on clutches that connect each side gear to the differential case. Technician B says the inward thrust of the side gears increases as wheel slippage increases. Which technician is correct?
A) Technician A only B) Technician B only C) Both Technicians A and B D) Neither Technicians A nor B
Two technicians are discussing oil filters. Technician A says that the oil will remain perfectly clean if just the oil filter is changed regularly. Technician B says that oil filters can filter particles smaller than the human eye can see. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B