Cylinder taper is being discussed. Technician A says taper does not affect the ring gap as the piston goes up and down. Technician B says that up to.010" (.254mm) is usually an acceptable amount of taper. Who is correct?
A. A only
B. B only
C. Both A and B
D. Neither A nor B
Answer: D
You might also like to view...
Which floor coverings are considered resilient coverings and what are the advantages of resilient coverings?
What will be an ideal response?
At ____, there is no voltage on the coils, so no current would flow through the coils, which means there is no magnetic flux, and no magnetic field or pole polarity.
a. 0 degrees b. 10 degrees c. 45 degrees d. 90 degrees
Plants grown for recreation and ornamental use:
A. require less labor than most other types of crops. B. do not contribute significantly to pollution problems that come from fertilizer and pesticide use. C. generally are considered to be frivolous and of no benefit to society. D. require about 1% of the land used for corn production but have a value about 50% of corn.
What is the advantage of using colder thermal storage for storing off-peak cooling capacity?
A) pumps can move colder water more easily B) the air feels colder C) it takes less energy to make colder ice D) less flow is required for a given cooling load