Technician A says a two-part glaze coat should be used as a final finish coat over the entire repair area. Technician B says the paint should be removed approximately 3 to 4 inches beyond the edge of the repaired surface when using conventional or lightweight fillers. Who is correct?
A. Technician A only
B. Technician B only
C. Both Technicians A and B
D. Neither Technician A nor B
C. Both Technicians A and B
Trades & Technology
You might also like to view...
A chilled water system should be insulated _____.
a. for heat conservation b. with a vapor retarder c. for personal protection d. only at the chillers
Trades & Technology
An OLMC is an ________
A) output logic microcomputer B) onboard logic management controller C) output logic macrocell D) optical logic main communicator
Trades & Technology
The ultrasonic leak detector uses a __________ to locate escaping refrigerant or nitrogen.
A. flame B. light C. microphone D. pump
Trades & Technology
How many BTUs of heat must I apply to 125 lbs of ice at -20 degrees F to bring it to 75 degrees F?
Fill in the blank(s) with the appropriate word(s).
Trades & Technology