Discuss sketching corners on circular parts.
What will be an ideal response?
The direction of radius of fillet lines changes on circular objects at a center line. The curved lines tend to straighten as they approach the center line and then slowly curve in the opposite direction beyond that point.
You might also like to view...
Silicone gaskets are not recommended for use with _____.
a. potable water b. air c. refrigerants d. serrated flanges
All insects are approximately the same size
Indicate whether the statement is true or false
The Controller Area Network (CAN) was developed to supplement the local interconnect network (LIN) bus system.
Answer the following statement true (T) or false (F)
Refer to Exercise 25. Assume that if m = 0, the value s = – 1.5 is sent, and if m = 1, the value s = 1.5 is sent. The value received is X, where X = s + E, and E ~ N(0, 0.64). If X ? 0.5, then the receiver concludes that m =0, and if X > 0.5, then the receiver concludes that m = 1.
a. If the true message is m = 0, what is the probability of an error, that is, what is the probability that the receiver concludes that m = 1? b. If the true message is m = 1, what is the probability of an error, that is, what is the probability that the receiver concludes that m = 0? c. A string consisting of 601s and 400s will be sent. A bit is chosen at random from this string. What is the probability that it will be received correctly? d. Refer to part (c). A bit is chosen at random from the received string. Given that this bit is 1, what is the probability that the bit sent was 0? e. Refer to part (c). A bit is chosen at random from the received string. Given that this bit is 0, what is the probability that the bit sent was 1?