What is the purpose of the bypass damper used in many zone systems?
A) To bypass low- and high-temperature limits on the equipment when only one zone is calling
B) To allow outdoor air to bypass the equipment during zone ventilation mode
C) To recirculate air that is not being used by the active zones
D) To allow outdoor air to bypass the equipment during free cooling
C
You might also like to view...
A _____________________ ditch would be cut into the area surrounding a livestock facility to prevent runoff containing waste materials from getting into streams
Fill in the blank(s) with correct word
Carry the answer to three decimal places. The weight of a spool of wire is 27.11 pounds. The spool weighs 3.2 pounds. Find the cost of the wire per pound if the cost of the spool of wire is $74.44. Express the answer to the nearer tenth of a cent.
Fill in the blank(s) with the appropriate word(s).
A trench 4 feet deep and 122 yards long is dug to contain several conduits. The trench is to contain 3 runs of 2" conduit, 2 runs of 1" conduit, and 1 run of 4" conduit. Each conduit must protrude out of the ground a minimum of 1 foot at each end. Each conduit section is 10 feet long. How many sections of 2" will be needed?
Fill in the blank(s) with the appropriate word(s).
Transitions are measured at the 50% point because transitions are not truly ________
Fill in the blank(s) with correct word