Answer the following statement(s) true (T) or false (F)
1. Machinery clutches were originally designed to engage very large motors to their loads after the motors had reached
running speeds.
2. The single-face clutch consists of two discs.
3. Double-face clutches are available in sizes up to 60 inches in diameter.
4. The magnetic drive can be used as a clutch.
5. A tachometer generator generates a voltage that is exponentially related to its speed.
1. TRUE
2. TRUE
3. FALSE
4. TRUE
5. FALSE
You might also like to view...
An incorrect SAI angle may be caused by a strut tower that is out of position.
Answer the following statement true (T) or false (F)
Most manufacturers recommend that brake parts should be cleaned with ________
A) Detergent and water B) Denatured alcohol C) Stoddard solvent D) Clean water only
During the vapor recovery phase, what is pumped from the condenser to the storage tank?
A) High-pressure vapor B) Cooling water C) Liquid refrigerant D) Low-pressure vapor
In making a gasket, a mechanic lays off 18 equally spaced holes on the circumference. Find the number of degrees between the centers of the holes.
A. 20 B. 30 C. 36 D. 45