What should be the length of each diagonal measurement of a square column whose base dimensions are 20 5/8" x 20 5/8"? Give the measurement in inches, and fractions of inches to the nearest tenth of an inch.
What will be an ideal response?
29' 2"
You might also like to view...
If a system has a(n) ___ for a metering device, the device will try to maintain evaporator superheat even with an excessive overcharge.
Fill in the blank(s) with the appropriate word(s).
Half-round and flat-top raceways not over 4 inches in width must be covered by ____ or more of concrete (or wood).
A. .25 inches B. .5 inches C. .75 inches D. one inch
When the concentration of oxygen on the exhaust side of the thimble is low (rich exhaust), a voltage of ________ is generated between the electrodes
A) 10-20 B) 0.25-0.50 C) 1.0-2.0 D) 0.60-1.0
You are checking your steering and exhaust system in a pre-trip inspection. Which of these problems, if found, should be fixed before the vehicle is driven?
a. Steering wheel play of more than 10 degrees (2 inches on 20 inches steering wheel.) b. Oil on a tire rod. c. If a gray smoke is coming out from the exhaust pipe.