What specifications require the use of specific products identified by brand name, model number, manufacturer's name, and other unique characteristics?
a. technical c. performance
b. proprietary d. titled
B
proprietary
You might also like to view...
NEC Table 220.12 requires a minimum general lighting load for office buildings to be based on _____.
a. 2-1/2 VA/ft2 b. 3 VA/ft2 c. 3-1/2 VA/ft2 d. 4 VA/ft2
The air in a classroom is maintained at 20ºC and 50% humidity in Colorado where the atmospheric pressure is 80 kPa. Using the equations, the humidity ratio is found to be nearest:
A) 0.0168 kgv /kga B) 0.0173 kgv /kga C) 0.0182 kgv /kga D) 0.0187 kgv /kga
If the accumulator is sweating should it be insulated? Why or why not?
a. No because it would make rusting a greater problem. b. Yes because rusting will cause pin-hole leaks in the steel body. c. Yes because it will stop the sweating and prevent water damage. d. No because it would stop the transfer of heat needed to boil off the refrigerant.
What is 15% of 90?
What will be an ideal response?