Angular-contact ball bearings are most often mounted in pairs _____ each other
a. perpendicular to
b. separated from
c. staggered from
d. in opposition to
d
You might also like to view...
In the accompanying figure, the basic dimension of DIM A is 1.0335 inches and the basic dimension of DIM B is 1.0359 inches. What is the minimum clearance in inches?
A. 0.0006 B. 0.0008 C. 0.003 D. 0.004
All of the following statements are true EXCEPT:
A. cylinders are deglazed for use with new rings only if they have excessive bore taper. B. damaged cylinders or cylinders with too much taper should be rebored and honed by a machine shop to fit new oversized pistons. C. the top of an oversize piston is stamped with the amount of oversize. D. pistons of 0.030" oversize are most commonly used.
A common material used as an insulator of electricity is copper.
Answer the following statement true (T) or false (F)
As part of a process piping system, a ____ is a mechanical device that causes liquid to flow through pipes.
A. vessel B. thruster C. pump D. propeller