All of the following are true about a Magnasteer power steering system EXCEPT:
a. As vehicle speed changes or lateral acceleration occurs the amount of effort required to steer the vehicle can be varied depending on the requirements.
b. At high speeds more assist is provided, which provides better road feel, firmer steering, and improved directional stability.
c. If the system senses lateral acceleration the steering effort will become firmer in an effort to reduce oversteering by the driver.
d. During low speed operation increased steering assist is provided for minimal steering effort to facilitate parking maneuvers and easy turning.
b. At high speeds more assist is provided, which provides better road feel, firmer steering, and improved directional stability.
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. Changing frequency causes a corresponding change in the inductive reactance of the windings. 2. Alternators are often used to control the speed of several induction motors that require different changes in speed. a. True 3. The Insulated Gate Bipolar Transistor (IGBT) is a current controlled device, not a voltage controlled device 4. Inverter rated motors are specifically designed to be operated by variable frequency drives. 5. Ramping permits the motor to bring the load up to speed slowly as opposed to simply connecting the motor directly to the line.
The designation W14 × 38 means that the
A) width of the section is 14 in. and the depth is 38 in. B) depth of the section is 14 in. and the width is 38 in. C) nominal depth of the section is 14 in. and its weight is 38 lb/ft. D) depth of the section is 14 in. and its weight is 38 lb/ft. E) none of the above.
Answer the following statement(s) true (T) or false (F)
1. More than one raceway may be run parallel in the floor, with one containing power wires and another containing communications wires. 2. Splices are typically made at outlets. 3. Each commercial building, that is accessible to patrons, is required to have at least one outlet that is dedicated for signs or outline lighting. 4. Grounds reduce electrical noise. 5. The raceway in cellular concrete floor slabs is metal.
When installed in moderate- to high-risk seismic design zones, prefabricated foundations are installed on poured-in-place footings instead of crushed stone to provide more resistance to ____.
A. tornadoes B. floods C. moisture D. earthquakes