Which of the following items is NOT part of a solenoid?

A) Spring B) Armature C) Core D) Contacts


D

Trades & Technology

You might also like to view...

What type of standards do most welding and fabricating drawings in the United States typically follow?

a. ASME/ANSI and AWS standards b. DIN and BS standards c. QRL and DRG standards d. None of the above

Trades & Technology

The NEC® defines Type __________ as an unthreaded thinwall raceway of circular cross section designed for the physical protection and routing of conductors and cables.

a. EMT b. IMC c. PVC d. RMC

Trades & Technology

As the load on an engine increases, the manifold vacuum decreases and the manifold absolute pressure ________

A) Changes with barometric pressure B) Increases C) Decreases D) Remains same value

Trades & Technology

Three different materials are shown in the section view of an object. The upper portion is made of a bronze material and is a horizontal rectangular piece. Under the bronze material, the remaining space is evenly divided vertically with a steel material on the left and a cast iron material on the right. Which of the following is (are) true?

A. If the bronze section lines are drawn at a 45° angle, then the steel and cast iron section lines could be drawn at a 135° angle. B. If the bronze section lines are drawn at a 45° angle, then the steel section lines could be drawn at a 135° angle, and the cast iron section lines could be drawn at a 90° angle. C. If the bronze section lines are drawn at a 135° angle, then the steel section lines could be drawn at a 45° angle, and the cast iron section lines could be drawn at a 180° angle. D. If the bronze section lines are drawn at a 135° angle, then the steel section lines could be drawn at a 45° angle, and the cast iron section lines could be drawn at a 60° angle. E. none of the above

Trades & Technology