This geometric tolerance is used to control the relationship of radial features to a datum axis and features that are 90 ? to a datum axis.
a. runout
b. perpendicularity
c. concentricity
d. profile
a. runout
You might also like to view...
Sizing a(n) ____________________ PV system is simpler than sizing a stand-alone PV system primarily because there are not as many system components to determine.
Fill in the blank(s) with the appropriate word(s).
What type of weld would be used if the ends of the pieces that are to be welded are prepared to be square, beveled, U-shaped, or J-shaped?
A. fillet weld B. groove weld C. surfacing weld D. plug weld
A hot water heating system is installed in a house. The system needs 140 feet of 3/4-inch copper tubing. The tubing lists for $1.70 per foot. A 10% discount is given. How much does the tubing cost? Round the answer to the nearer whole cent.
Fill in the blank(s) with the appropriate word(s).
What is the purpose of the DEF heating circuit?
A. To heat the DEF to dosing temperatures. B. To prevent DEF freezing in colder climates. C. To create steam pressure in the DEF canister. D. To convert liquid DEF to a gas state.