A propane tank with a tare weight of 15 lbs weighs 31 lbs. How much fuel is in the tank in gallons?
Fill in the blank(s) with the appropriate word(s).
3.13 gal
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. Two-stroke power equipment engines are becoming more prominent in the power equipment engine industry. 2. Two-stroke engines in today’s power equipments are found primarily in small handheld units such as gas-powered blowers and string trimmers. 3. If the piston rings in a two-stroke engine are worn, the compression gauge displays a pressure reading that is higher than the manufacturer’s specification. 4. When looking at the reed valve assembly, there should be little to no air gap between the reed valve and the reed valve seat. 5. After an engine has been rebuilt, the engine should start within 10–15 pulls of the starter rope.
When brazing very small joints or thin metal, the type of flame used in order to prevent the base metal from melting is a(n) _____.
a. carburizing flame b. neutral flame c. oxidizing flame d. non-feathering flame
Which of the following capitalizes on a high-bandwidth network to deliver high-speed, two-way data?
A. Integrated services digital networks B. Voice frequency channels C. Computer networks D. Cable modems
When the heat load on the evaporator increases, the automatic expansion valve:
A) Opens to feed more refrigerant. B) Closes to keep the pressure from increasing. C) Sends a signal to the electronic control board indicating the change. D) Does nothing because AEVs are not modulating devices.