In recent years, a soil test for nitrogen has been developed and widely used in humid regions in predicting how much nitrogen will need to be applied to supplement natural mineralization in the soil. This test is called the:
A) diagnosis and recommendation integrated system (DRIS).
B) pre-sidedress nitrate test (PSNT).
C) soil nitrogen partial analysis (SNPA).
D) Differential Nitrate Extraction Test (DNET).
E) Mehlich II nitrogen test.
B
You might also like to view...
Architectural drawings show the material composition of walls. Is this information of interest to the structural drafter and designer? If so, why?
What will be an ideal response?
A series of ASME SA-193 carbon steel bolts are bolted to the upper surface of a metal plate. The bottom surface of the plate is subjected to a uniform heat flux of 5 kW/m2. The upper surface of the plate is exposed to ambient air with a temperature of 30°C and a convection heat transfer coefficient of 10 W/m2•K. The ASME Boiler and Pressure Vessel Code (ASME BPVC.IV-2015, HF-300) limits the maximum allowable use temperature to 260°C for the SA-193 bolts. Determine whether the use of these SA-193 bolts complies with the ASME code under these conditions. If the temperature of the bolts exceeds the maximum allowable use temperature of the ASME code, discuss a possible solution to lower the temperature of the bolts.
What will be an ideal response?
Welded pipe fittings _____
a. must be peened before they are cleaned and welded b. are factory-cleaned and do not require additional cleaning c. must be field beveled and then cleaned d. are typically beveled from the factory but need cleaning
What rules should you follow when reading schematic diagrams?
What will be an ideal response?