This term means the ability to be hammered or pressed into shape without breaking.

a. adhesion
b. ductility
c. malleability
d. extruded


c. malleability

Trades & Technology

You might also like to view...

In typical engine lubrication systems, what components are the last to receive oil and the first to suffer from a lack of oil or oil pressure?

A) Main bearings B) Rod bearings C) Oil filter D) Valve train

Trades & Technology

What causes a variable ratio steering gear to be able to change the ratio as the steering wheel is turned?

A) Changing the number of teeth on the worm gear B) Using two or three different sector gears depending on design C) Changing the length of the teeth on the sector gear D) Using a variable length pitman arm

Trades & Technology

On a binary-weighted D/A converter the least significant binary input

A) supplies the least voltage. B) connects to the largest resistor. C) connects to a 1 k? resistor. D) connects to the smallest resistor.

Trades & Technology

When a sinking output module is activated, conventional current flows __________ the field device to which it is connected.

A. into B. out of

Trades & Technology