Many service shops use the word ____________________ when referring to particular service procedures in maintenance of power equipment engines.
Fill in the blank(s) with the appropriate word(s).
tune-up
You might also like to view...
100 kg/s of nitrogen enters a steady-state counter-current heat exchanger at T = 150 K and P = 10 MPa. The nitrogen is cooled in the heat exchanger and then enters an adiabatic flash chamber. The outlet pressure of the flash chamber is P = 0.8 MPa. The liquid leaving the flash chamber is removed as product. The vapor leaving the flash chamber is returned to the counter-current heat exchanger, in which it is heated to a temperature of 135 K. What is the flow rate of liquid product? Use Figure 2-3 for data.
A. 100 kg/s B. 60 kg/s C. 25 kg/s D. 40 kg/s E. Insufficient information to solve
In a technical report, all tables must be numbered and have a descriptive title.
a. True b. False
When adjusting headlights without the aid of a headlight aiming device, what should be the distance between the front of the truck and the target screen?
A. 10 feet B. 25 feet C. 50 feet D. 100 feet
When troubleshooting a hydronic heating system, the technician notices that the circulator pump is running and the burner is firing, but no hot water is flowing through the system. What is the most likely problem?
A. defective circulator pump B. defective room thermostat C. air in the system D. high limit open