Stringers should be centered on U-heads and top plates to _____
a. eliminate sagging
b. avoid eccentric loads
c. keep forms level
d. prevent shoring settlement
b
You might also like to view...
Briefly explain the difference between a cumulative compound motor and a differential compound motor.
What will be an ideal response?
A machine tool purchased 2 years ago for $40,000 has a market value best described by the relation $40,000 ? 3000k, where k is the number of years from time of purchase. Experience with this type of asset has shown that its annual operating cost is described by the relation $30,000 + 1000k. The asset’s salvage value was originally estimated to be $10,000 after a predicted 10-year useful life. Determine the current estimates for P, S, and AOC for a replacement study, assuming it will be kept only 1 more year, which will be the third year of ownership.
What will be an ideal response?
This is the implication of up link power control.
A. Reduces overall up link interference while minimizing UE's transmit power B. Reduces the battery life of the UE because the UE may be asked to increase its transmit power level C. The gNB needs to transmit at a higher power level to compensate for any changes in the UE's transmit power level to account for any link imbalance
When the air/fuel ratio is expressed as lambda, a lambda number of less than 1 indicates a(n) ________ exhaust
A) Excessively hot B) Excessively cold C) Rich D) Lean