____ is the difference in temperature at the sensing element between make and break of the controller’s contacts when the controller is cycled.
a. Resolution sensitivity
b. Operating differential
c. Sensitivity
d. Response time
b. Operating differential
You might also like to view...
Technician A says heat checking can be caused by numerous panic stops in rapid succession. Technician B says it can be caused by "riding" the brake pedal. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
Lining fade occurs when ________
A) The friction material overheats B) The brake fluid boils C) Dust particles build up between the friction material and the drum or rotor D) The drum or rotor expands from heat
Which of the following statements for the Logix processors is NOT true?
A) The timer output is triggered when the ACC is equal to or greater than the PRE value. B) Logix processors use a tag name in place of a timer file number. C) Logix has a fixed time base of 0.001 seconds. D) Tag values are monitored using the edit tab on the tags dialog box.
A standard is an operational principal, criteria, or requirement, or a set of these combinations.