Defective ball joints can cause all of the following problems EXCEPT ________
A) Shimmy-type vibration felt in the steering wheel
B) Vehicle wander on a straight road
C) Loud popping or squeaking when driving over bumps
D) All of these can be caused by defective ball joints.
D
You might also like to view...
If the suction line and compressor are sweating, what is the problem?
What will be an ideal response?
When heat-activated tape is used for duct closure, before applying any sort of stress, all joints and seams should be allowed to cool to a temperature below _____.
a. 100°F b. 125°F c. 150°F d. 175°F
One of two alternatives will be selected to reduce flood damage in a rural community in central Arizona. The estimates associated with each alternative are available. Use B/C analysis at a discount rate of 8% per year over a 20-year study period to determine which alternative should be selected. For analysis purposes only, assume the flood damage would be prevented in years 3, 9, and 18 of the study period.
What will be an ideal response?
A drive control that returns to neutral and locks when released is referred to as a(n) _____.
a. emergency cutout b. safety interlock c. deadman switch d. termination device