Explain why open-cell structures are created when the mold expansion in high-pressure foam molding is quite rapid and why closed-cell structures occur when the molding is slower
What will be an ideal response?
Rapid expansion of the mold tends to allow the gas inside the cells to expand very rapidly and to expand to a much larger size. This large expansion can rupture the walls of the foam and change closed cells into open cells.
You might also like to view...
What makes the best garden soil?
A) Sand B) Clay C) Loam D) Silt
In a water-cooled condensing unit/cooling tower combination, the temperature difference of the water through the condenser will be approximately ____.
A. 10°F B. 20°F C. 30°F D. 40°F
In a power plant, pipes transporting superheated vapor are very common. Superheated vapor is flowing at a rate of 0.3 kg/s inside a pipe 5 cm in diameter and 10 m in length. The pipe is located in a power plant at 20°C and has a uniform surface temperature of 100°C. If the temperature drop between the inlet and exit of the pipe is 30°C, and the specific heat of the vapor is 2190 J/kg•K, determine the heat transfer coefficient as a result of convection between the pipe surface and the surroundings.
In what year was the automatic transmission introduced in passenger vehicles?
A) 1952 B) 1920 C) 1963 D) 1940