What type of fastener features "minor" components designed to slide back and forth over each other and thereby increase or decrease the distance between the two components?

What will be an ideal response?


A spline is not meant to hold two parts tightly together without movement between them. In fact, these two "minor" components are designed to slide back and forth over each other and thereby increase or decrease the distance between the two components.

Trades & Technology

You might also like to view...

On a vernier transit level, the line of sight is perpendicular to the horizontal axis when the telescope level bubble is centered and the vertical circle/arc is set at _____.

a. 0 degrees b. 90 degrees c. 180 degrees d. 270 degrees

Trades & Technology

Hidden lines are always shown in an isometric sketch.

Answer the following statement true (T) or false (F)

Trades & Technology

The output shaft of a stepping motor _____.

A. moves through a specific angle for each input pulse B. rotates at a constant speed during each input pulse C. steps continuously when power is applied D. rotates continuously when power is applied

Trades & Technology

Add the following decimal fractions: 1.577 meters + 6.5329 meters + 10.7721 meters + 0.3776 meters =

Fill in the blank(s) with the appropriate word(s).

Trades & Technology