Center lines are displayed on a print using a series on long and alternating double short dashes to shows or locate the centers of symmetrical objects.
Answer the following statement true (T) or false (F)
False
You might also like to view...
Technician A says enabling criteria defines the criteria that must be met before the vehicle will enter closed loop. Technician B says enabling criteria defines the criteria that must be met in order for a monitor test to be completed. Who is correct?
A. Technician A B. Technician B C. Both A and B D. Neither A nor B
(a) Find the current i in the circuit of Fig. 2.128(a). (b) An ammeter with an internal resistance of 1 ? is inserted in the network to measure i' as shown in Fig. 2.128 (b). What is i"? (c) Calculate the percent error introduced by the meter as  FIGURE 1.png)
 figure 2.png)
Graphics files include bit patterns-rows and columns of dots called a(n) ____________________-that must be translated by graphics software into an image.
Fill in the blank(s) with the appropriate word(s).
The formula for calculating the tailstock offset is: Offset = L × (D - d)/2 × L1 where L is the total length of the piece and L1 is the length of the taper. D is the large diameter and d is the small diameter. If a shaft, that is to be tapered on one end , is 8 inches long and the taper is to be 3 inches in length, the shaft diameter is 1-1/4 inches and the small end of the taper is 1 inch
diameter, the offset should be: A) 1/3 (.333 ) inch B) .250 inch C) .100 inch D) 2.3 (.666 ) in.