Why would a scan tool be needed when checking automatic transmission fluid levels?
A) To read the fluid temperature
B) To keep the engine from stalling when the dipstick is removed
C) To make sure that the transmission is in park
D) To monitor the fluid level indicator
A
You might also like to view...
Tilt-up construction is not generally cost effective for structures under _____.
a. 20,000 square feet b. 15,000 square feet c. 10,000 square feet d. 5,000 square feet
Which of the following is NOT a responsibility of the charge pressure in a hydrostatic drive system?
A. provides enough oil flow for cooling B. actuates the servos C. drives the piece of equipment at low speeds D. replenishes oil that is lost through the case drain
The solenoids hold in coil will have less current flowing through it than the pull in coil because:
a. it gets energized after the pull in coil b. it only gets half system voltage c. it has a separate resistor d. it's wire is a smaller gauge
Genetic dominance means one gene overrides the effects of another.
Answer the following statement true (T) or false (F)