The process of allocating the cost of the item over its useful life is known as ____.

A. depreciation
B. deflation
C. amortization
D. inflation


Answer: C

Trades & Technology

You might also like to view...

Glass block shower systems kits include _____ .

A. glass block mortar B. plumbing fixtures C. glass blocks D. ceramic tile

Trades & Technology

With the intersection of two cylinders having different diameters, the developed edge of the larger cylinder will _____.

a. be a straight line b. contain ellipses c. be a wavy line d. contain right angles

Trades & Technology

Which of the following would you NOT expect to be true at the new steady state (compared to normal operation)?

An ammonia synthesis process normally works as follows: Fresh feed air and hydrogen are combined with a recycle stream and the combined stream is compressed to 10 MPa. The compressed stream enters a reactor, and the entering nitrogen and hydrogen are converted into ammonia until the reaction reaches equilibrium. The reactor effluent, still at 10 MPa, enters a condenser. The liquid and vapor streams leaving the condenser are in VLE. The liquid stream, which is essentially pure ammonia, is the product. A fraction of the vapor stream leaving the condenser is purged, while the rest is recycled. There is a problem with the compressors and the pressures of the reactor and the condenser both drop to 9 MPa. The fresh feed rate and the fraction of vapor leaving the condenser that is purged each remain the same, as do the reactor and condenser temperatures. The system reaches a new steady state at 9 MPa.

Trades & Technology

With what must the nozzle spray pattern be compatible for proper mixing?

A) Burner air pattern B) Mix of oil and air C) Spray angle D) Orifice

Trades & Technology