After a TP sensor has been tested using the MIN/MAX function on a DMM, a reading of zero volts is displayed. What does this reading indicate?

A) The TP sensor signal is shorted to 5-volt reference.
B) The TP sensor is open at one point during the test.
C) The TP sensor is shorted.
D) Both B and C are possible.


B

Trades & Technology

You might also like to view...

What is the condenser saturation temperature if there is 20°F of subcooling and the outlet temperature of the refrigerant is 90°F?

What will be an ideal response?

Trades & Technology

How many gallons will a cylindrical gas can that is 15.0 inches in diameter and 7.5 inches tall hold? Round your answer to the nearest tenth of a gallon

What will be an ideal response?

Trades & Technology

1. If a collision repair shop used 1.5 cylinders of shielding gas per week, how many cylinders would the shop need for a year?

What will be an ideal response?

Trades & Technology

Current flow is the same through all components in ____ circuits.

A. series B. parallel C. series-parallel D. all

Trades & Technology