Describe and give an example of hard conversion.
What will be an ideal response?
When materials are purchased from the United States, it is often necessary to make a hard conversion to metric units. This means that the typical inch units are converted directly to metric. For example, a 2 X 4 that is milled to 1-1/2 X 3-1/2 converts to 38 X 89 mm. When making the conversion from inches to millimeters, use the formula 25.4 X inch = millimeters.
You might also like to view...
For recreational wildlife watchers, snags are a _____________________ indicating where chances for seeing wildlife are greatest
Fill in the blank(s) with correct word
A bipolar BLDC motor with k? = 1.0 Vs is running at regenerative braking mode. The dc voltage source is 180 V. The armature resistance of the motor is 1.0 ?. The measured current is 10 A and is continuous. Compute the developed torque, the power delivered to the source, and the speed of the machine.
What will be an ideal response?
Technician A says that the cruise control on a vehicle equipped with an electronic throttle control (ETC) system uses a servo to move the throttle. Technician B says that the cruise control on a vehicle with ETC uses the APP (Accelerator Pedal Position) sensor to set the speed. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
In the 741 op amp. pin #2 is the ____ input.
a. diverting b. inverting c. restricting d. polling