A groove 7/8 inch deep is to be milled in a steel plate. How many cuts are required if each cut is 3/32 inch deep?
What will be an ideal response?
7/8 ÷ 3/32 = 7/8 x 32/3 = 28/3 = 9 1/3
You might also like to view...
Which of the following statements is correct?
A) Demand pull inflation is caused by an increase in demand and an increase in the quantity supplied. B) Cost push inflation is the result of rising input costs pushing the aggregate demand curve to the left. C) Demand pull inflation is caused by an increase in demand and an increase in supply. D) None of the above.
Chemical costs associated with a packed-bed flue gas incinerator for odor control have been decreasing uniformly for 5 years because of increases in efficiency. If the cost in year 1 was $100,000 and it decreased by $5,000 per year through year 5, the present worth of the costs at 10% per year is closest to:
(a) $344,771 (b) $402,200 (c) $515,400 (d) $590,700
In a General Motors parallel hybrid truck, where is the electric motor (FAS)?
A) Attached to the crankshaft at the rear of the engine B) Inside the transmission assembly C) Belt driven at the front of the engine D) At the output of the transmission
In multi-ply construction, when strip lamination is used to fasten the face ply to the base ply, the strips of
adhesive are spaced _____. a. 3" to 6" OC b. 8" to 12" OC c. 16" to 24" OC d. 18" to 22" OC