Which of the following can accelerate corrosion rates and damage vessels by overheating?
a. Overpressurization
b. Underpressurization
c. A vacuum within the vessel
d. Changes in operating temperatures
a. Incorrect. Changes or deviations (excursions) in operating temperatures and extreme levels can accelerate corrosion rates and damage vessels by overheating.
b. Incorrect. Changes or deviations (excursions) in operating temperatures and extreme levels can accelerate corrosion rates and damage vessels by overheating.
c. Incorrect. Changes or deviations (excursions) in operating temperatures and extreme levels can accelerate corrosion rates and damage vessels by overheating.
d. Correct. Changes or deviations (excursions) in operating temperatures and extreme levels can accelerate corrosion rates and damage vessels by overheating.
You might also like to view...
The nose of the albino White ferret is ____________________
Fill in the blank(s) with correct word
Five thousand new smart camera systems are needed annually to expand the security surveillance of roads, buildings, airports, parks, etc. in a large metropolitan area. The system components can be obtained in one of three ways: (1) Make them in one of three plants partially owned by the government; (2) Buy them off the shelf from the one and only manufacturer; or (3) Contract to have them made to specifications by a vendor. The estimated annual cost for each alternative is dependent upon specifics of the plant, the producer, or the vendor. The information below details the alternative, a probability of occurrence, and the estimated annual cost. (a) Construct and solve a decision tree to determine the least-cost alternative to provide the components. (b) Once you have chosen the
alternative on the tree, use a spreadsheet to determine the change in probability that the Buy alternative requires to make it equally attractive with the chosen alternative. Assume that the probability change will be equally distributed to the other probability estimates. Write the new probability values.
 FIGURE 1.png)
When documenting the work order, what things should be listed?
A) The parts that were replaced B) The test equipment used for diagnosis C) The test procedure that was followed D) All of these
A shorted condition in an electromagnet causes the resistance to increase.
Answer the following statement true (T) or false (F)