A Bosch sleeve metering, rotary distributor pump fueled engine performs well at rated speed and load, but smokes under load at peak torque rpms. Which of the following might help correct this problem?
A. positive torque control
B. negative torque control
C. derate high idle speed
D. use fuel with higher CN
Answer: B
You might also like to view...
The PCM uses the engine off natural vacuum test to test for ____________________ in the evaporative emissions system.
Fill in the blank(s) with the appropriate word(s).
Where can you find information on fixes for problems?
What will be an ideal response?
When mixing dry mix with a powered device, such as an electric drill, the rotation speed should be slow,
typically _____. a. 100 to 300 rpm b. 200 to 400 rpm c. 300 to 500 rpm d. 400 to 600 rpm
When replacing a drive axle shaft, be sure to ________
A) Use a pry bar or special tool to remove the inner joint B) Loosen the retaining nut with the wheels on the ground C) Torque the retaining nut to factory specifications D) All of the above