When charging a maintenance-free (lead-calcium) battery:

A) The initial charging rate should be about 35 amperes for 30 minutes

B) The battery may not accept a charge for several hours, yet still be a good (serviceable) battery

C) The battery temperature should not exceed 215°F (hot to the touch) 

D) All of the Above 


Answer: D) All of the Above

Trades & Technology

You might also like to view...

The contacts of a contactor make a complete circuit when the contactor is ____________________, allowing voltage to flow to the controlled load.

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

During the capacity test the voltage reads 10.6 volts. This indicates that the battery must be replaced.

Answer the following statement true (T) or false (F)

Trades & Technology

In typical engine lubrication systems, what components are the last to receive oil and the first to suffer from a lack of oil or oil pressure?

A) Rod bearings B) Valve train components C) Oil filter D) Main bearings

Trades & Technology

In an electronic air cleaner, the smallest particles in the air are trapped in the _____

a. pre-filter b. ionizer section c. collector section d. charcoal filter

Trades & Technology