_________________________ is measured as the maximum force per unit of area that causes a complete fracture or break in the material.
Fill in the blank(s) with the appropriate word(s).
Tensile strength
You might also like to view...
Minimum standards governing the construction of kennels/catteries include
A. Adequate ventilation and temperature regulation B. Shade from sun and shelter from inclement weather C. Protection from injury and provisions for good sanitation, isolation facilities D. A structurally sound building with provisions for different sized breeds/species E. All of the above
An effective method used to remove an old or inferior weld is _____
a. plasma arc cutting b. brazing c. air-carbon arc cutting d. gas-tungsten arc cutting
What is VC at the end of the input pulse to an RC integrator if the input pulse is 12 V and the pulse width equals one time constant?
A) 4.41 V B) 0 V C) 12 V D) 7.59 V
What do the letter "T" and the letter "H" following the four digit designation for aluminum represent?
A) Temper and heat treatment B) Tested and strain hardened C) Solution heat treatment and strain hardening D) Titanium alloyed with aluminum and hardened