In a hydraulic clutch, the slave cylinder piston _______
A) Is connected to the clutch pedal B) Is pushed by fluid pressure
C) Both A and B D) Neither A nor B
B
You might also like to view...
Each of the following incompressible substances are heated by increasing its internal energy by 1500 kJ, with the purpose of increasing the temperature from 300 K to 500 K. Determine the mass of each substance which will result in this temperature increase:
(a) aluminum (c = 0.90 kJ/kg-K) (b) gold (c = 0.13 kJ/kg-K) (c) zinc (c = 0.39kJ/kg-K) (d) gasoline (c = 2.08 kJ/kg-K). Given: ?U = 1500 kJ; T1 = 300 K; T2 = 500 K What will be an ideal response?
A _____ is a flat-edge preparation that is placed at the end of a bevel joint.? ?
A. bevel? B. chamfer? C. mismatch? D. surface?
What is the factory scan tool for Chrysler-Jeep vehicles?
A) Snap-On B) IDS C) Tech 2 D) WiTECH
The power wire for an electric furnace should be:
A) 12 AWG in most cases. B) Sized to handle the minimum circuit ampacity on the data plate. C) The same wire gauge as the internal wiring in the furnace. D) No larger than 10 AWG in order to avoid voltage drop.