When setting a chute for loading and unloading hogs, it should slope no more than

____________________ degrees.



Fill in the blank(s) with the appropriate word(s).


25
twenty-five
twenty five

Trades & Technology

You might also like to view...

Distronic is  the name thatMercedes gave their cruise control that has the ability to maintain a safe distance from other vehicles on the road ahead with no input from the driver.

Answer the following statement true (T) or false (F)

Trades & Technology

Which of the following is a correct statement regarding the selection and/or connection of shielding-gas

cylinders to the welding equipment? a. The shielding gas selection is not important; all of the available gases do an equal job in all welding applications. b. Remove the cylinder?s protective cap, momentarily crack the cylinder valve open to blow out any dirt, and then close it. c. Install the regulator/flowmeter assembly first, then crack the cylinder valve open to blow out any dirt and debris. d. When using argon as a shielding gas, special precautions and respirators are required due to its toxicity.

Trades & Technology

Transient voltages are the most dangerous:

A) When reading voltage at the main power panel of the house. B) When reading voltage at the meter base where power comes in the house. C) When reading voltage at the disconnect to the unit. D) When reading voltage inside the unit.

Trades & Technology

A fixed-restriction system operating with a refrigerant overcharge will have:

A) A high system superheat. B) A low system superheat. C) A low subcooling. D) Higher temperature drop across the evaporator.

Trades & Technology