Which of these prevents the accidental selection of two gears at the same time?
A) Detents B) Interlocks C) Both A and B D) Neither A nor B
B
You might also like to view...
Two technicians are discussing the testing of a catalytic converter. Technician A says that a vacuum gauge can be used and observed to see if the vacuum drops with the engine at 2500 RPM for 30 seconds. Technician B says that a pressure gauge can be used to check for backpressure. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B
With the standing pressure test, the __________ the system stays under pressure, the more reliable the leak-check will be. On residential systems, __________ should be more than sufficient time for even the smallest leak to cause movement on the gauge. If at all possible, the system should be under pressure __________ to ensure that the system is leak-free prior to startup. If a _________ leak is present, the pressure in the system will begin to drop rapidly. __________ leaks may require much more time to show up on the gauge.
What will be an ideal response?
Kinks in sheet metal, engine vibrations, cracked windshields, and peeling paint are considered a few of what are known as visual damage indicators, and may signal to a damage estimator that a vehicle has sustained:
A. Electrical system damages. B. Primary damages to the tail lamps. C. Secondary damages. D. None of the above.
There are two conductors, a red and a blue installed in metallic conduit. You are using a MEGGER to test for shorts. How should the two leads of the MEGGER should be connected?
A. one to the blue lead and one to the conduit B. one to the red lead and one to the conduit C. one to the blue lead and one to the red lead D. both to the conduit