The inner edge of any bend in Type NM cable cannot be less than __________ times the cable diameter.
a. 6
b. 5
c. 4
d. 3
b. 5
You might also like to view...
When planning the installation of jacket on any piping run, what is the main thing to keep in mind for the sequence of section installation?
a. Whole sections should be installed before cut sections. b. Start at walls and work toward the middle of the pipe run. c. Jacket the pipe run except for brackets, then go back and do the brackets. d. Place the jacket seams in a sequence so they will always shed water.
How does the style of the building affect the landscape design?
What will be an ideal response?
In a dual dc power supply, the terminal that is common to both voltage sources, is the
A) positive voltage terminal B) negative voltage terminal C) ground terminal D) common terminal
A driver should never coast in neutral in a vehicle with a fully automated transmission because this will damage the transmission and could cause the driver to
A. misread the gauges on the dashboard B. lose control of the vehicle C. blow out a tire D. damage the engine