A cutaway view of a building or object is known as a(n) _____.
a. detail drawing
b. sectional drawing
c. architectural drawing
d. branch circuit drawing
b. sectional drawing
You might also like to view...
In the GTAW process, contamination left on the metal will be deposited in the weld because ____.
A. the low arc temperature does not vaporize it B. the low amperage does not allow it to be burned off C. tungsten contamination is a constant problem that cannot be eliminated D. there is no flux to remove it
When a component is used to perform the function of start it is generally connected in ____________________ with the existing START button.
Fill in the blank(s) with the appropriate word(s).
The steering shaft torque sensor uses ________ as inputs to the EPS control module
A) Voltage signals B) Viscous resistances C) Calibrated springs D) Vacuum pulses
The process by which thermal energy is transferred by a vacuum is called __________.
A. convection B. conductance C. radiation