A view enlargement ____.
A. is used primarily when a detail that needs to be dimensioned is too small to show the dimensions clearly
B. is a view with a larger scale than that used on the regular multiviews
C. has a thick phantom line circle around the area to be enlarged with a detail view identification letter
D. both a and c
E. all of the above
Answer: D
You might also like to view...
Write the program hole locations (coordinates) in table form for the accompanying figure. List the holes in sequence. All dimensions are in inches. Use a) absolute dimensioning and b) incremental dimensioning.
What will be an ideal response?
If the total computed load of a residence is 45,840 volt-amperes, the computed amperage of the residence is ____________________ amperes.
Fill in the blank(s) with the appropriate word(s).
Windshield washer pumps can be damaged if __________
A) Contaminated windshield washer fluid is used B) Ethylene glycol antifreeze is used C) Pure water is used in freezing weather D) All of the above
Technician A says a pull to the right during braking could be caused by a defective metering valve. Technician B says a pull to the left could be caused by a defective proportioning valve. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B