Multiple form panels that are fastened together for efficient wall forming are described as _____.
a. unitized forms
b. combined forms
c. fabricated forms
d. gang forms
Answer: D
You might also like to view...
The longest cutback line for a 45-degree miter for a 90-degree turn on a piece of 4-inch pipe (4.5 inch OD) would be _____ inches.
a. 15/16 b. 2 c. 2-1/4 d. 2-7/8
Technician A says that air bag electrical terminals are copper-plated to protect against corrosion. Technician B says that pretensioners are explosive (pyrotechnic) devices which remove the slack from the seat belt and help position the occupant. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Most manufacturers specify a maximum axial play for ball joints of about _______
A) 0.010 in. (0.25 mm) B) 0.030 in. (0.76 mm) C) 0.050 in. (1.27 mm) D) 0.003 in. (0.076 mm)
Technician A says a hydroformed part is usually recognizable because it has sharply formed square corners. Technician B says a kinked frame rail should be replaced because it cannot be repaired without the use of heat. Who is correct?
A. Technician A only B. Technician B only C. Both Technicians A and B D. Neither Technician A nor B