Determine the required pin diameter at A in Figure 13.6 if it is in double shear. The pin is made of aluminum. Use a factor of safety of 2.5 based on yield strength. Choose the next larger commercial size if pins are available in 0.5 mm sizes.
 FIGURE 1.png)
 ANSWER.png)
You might also like to view...
In the truss shown, find the value of ?ABE in degrees.
Fill in the blank(s) with the appropriate word(s).
What effective interest rate per year, compounded continuously, is equivalent to a nominal rate of 10% per year? Solve by formula and spreadsheet function.
What will be an ideal response?
A(n) ____________________ oscillator stores energy in a reactive component during one phase of the oscillation cycle and gradually releases the energy during the relaxation phase of the cycle.
Fill in the blank(s) with the appropriate word(s).
The box wrench is a general duty wrench but provides __________ strength than the open-end wrench does. The box wrench is __________ likely to slip during use, as the tool completely surrounds the fastener being tightened or loosened.
What will be an ideal response?