The biggest "enemies" of a valve body include ________.

A) Cold ATF
B) City and highway driving
C) Dirt and overheated fluid
D) Magnetism


C) Dirt and overheated fluid

Trades & Technology

You might also like to view...

Answer the following statement(s) true (T) or false (F)

1. To measure the wattage of a circuit, a meter must have two coils; one coil is affected by the magnetism and one by the resistance. 2. One of the most common methods used to accurately measure values of resistance, inductance, and capacitance is with a bridge constructed by connecting four components together to form a parallel-series circuit. 3. Many digital meters have voltage range settings from 20 millivolts to 200 volts, and the higher ranges are used for accuracy. 4. Digital ohmmeters measure resistance by measuring the amount of voltage drop across an unknown resistance. 5. An ohmmeter must never be connected to a circuit when the power is turned on.

Trades & Technology

There is a special sale on engine oil. If you purchase more than one 12-quart case, you will receive a 5 percent discount. If you purchase six or more cases, you will receive a 10 percent discount. You have two vehicles that require an oil change every 4,000 miles. Vehicle #1 requires four quarts per oil change plus one additional quart when you also change the oil filter. Vehicle #2 requires five quarts per change plus one quart whenever the filter is changed. Each year your family drives vehicle #1 about 16,000 miles and vehicle #2 about 24,000 miles. You change the oil filter every other time the oil is changed. The normal price for oil is $22.49 per case. Oil filters cost $4.39 each. How much will a one-year supply of oil cost for both vehicles?

Fill in the blank(s) with the appropriate word(s).

Trades & Technology

While on a long trip, you pass mile marker 115 at 9:00 A.M., and mile marker 265 at noon. What is your average speed during this time?

What will be an ideal response?

Trades & Technology

List three key indicators that pulleys are not aligned properly on blowers.

What will be an ideal response?

Trades & Technology