Technician A says that splitter slip-out often occurs when using the clutch on upshifts. Technician B says that splitter slip-out can be caused by pre-selecting splitter shifts. Who is correct?
A. Technician A only
B. Technician B only
C. Both A and B
D. Neither A nor B
Answer: B
You might also like to view...
If the weld gap is too large, it may result in _____.
a. inclusions b. chattering c. galling d. burn-through
Where are the instructions for a computer program stored prior to
The truth tables in Figure shown below describe the operations of the AND, OR, NAND, NOR, Inverter, and Exclusive-OR (EX-OR) logic functions.
What will be an ideal response?
The native peoples of Virginia (Powhatans) succumbed to the Europeans because they
A. died in large numbers from European diseases. B. lacked the unity necessary to resist the well-organized whites. C. were no longer a resource for food once the Virginians began growing their own crops. D. were not a reliable labor source and could be disposed of without harming the colonial economy. E. All of these are correct.
The best way to diagnose an ECM motor is to:
A) Turn off power to the unit, remove the control module, and ohm test the motor. B) Leave power on to the unit and check for voltages at the harness. C) Turn off power to the unit, remove the control harness, and connect a test controller. D) Turn off power to the unit, remove the control harness, and ohm test the lead end to end.