How is the quality of a weld pin attachment tested?
a. By bending the weld pin over to see if the weld fails.
b. Measuring the current flow through a completed weld.
c. Measuring the perpendicular pull that can be applied before the weld fails.
d. Hanging insulation on the pin and measuring how far it bends.
a. By bending the weld pin over to see if the weld fails.
You might also like to view...
Given the graph below, the firm prefer to be at point H rather than point G because of ________.
What mixture concentricity of propylene glycol to water provides maximum antifreeze protection?
A. 100 percent B. 60 percent C. 30 percent D. 20 percent
Individuals known as ____ raters inspect, test, and certify homes as meeting ENERGY STAR standards.
A. SHES B. HIS C. HERS D. ESS
A grounding connection to the grounded (neutral) conductor is not permitted at or for which of the following locations?
A. Separately derived systems B. Separate buildings supplied by a feeder C. A new branch circuit for an electric range D. Meters on the load side of the service disconnecting means but located near the service